Click on the Saw Category needed:
Popular Tools Brand are high precision carbide tipped saws made to ISO standards for long life and fine true cutting. Click on a category name to see the saws offered in that category:
| GENERAL PURPOSE SAWS - ATERNATE TOP / TRIPLE CHIP
|
| These saws are designed for cutting natural woods, plywood, chipboard and MDF. The TCG teeth offer less wear than the ATB teeth. The blades designated by the prefix GAM and GTM contain Micro-Sheen C-4, sub-micron carbide, which provides for a longer tool life.
|
| GLUE JOINT RIP SAWS
|
| Designed for operations requiring an extra smooth cut, such as solid wood pieces that will be glued together. Use these blades for rip cuts only.
|
| RIP & GANG RIP SAWS - ATB
|
| Designed for ripping soft or hard woods where a strong grain pattern can cause saw to drift and follow grain. ATB design helps to maintain direction and provide a clean, straight cut.
|
| RIP & GANG RIP SAWS - FTG
|
| These saws are designed for ripping soft or hard woods where chiseling action of FTG is effective. FTG grind is the fastest, most efficient tooth design for rip cuts.
|
| LAMINATE SAWS
|
| A higher angle on top bevel gives this saw an extra sharp shearing action to slice through single or double sided laminates without chipping. These blades are good for laminates, melamine , coreboard, and other composite materials. Made with Micro - Sheen C-4 sub-micron carbide for longer life.
|
| RADIAL ARM SAWS
|
| These saws are designed similar to the General Purpose saw but with a negative hook angle to prevent grabbing. This saw provides excellent crosscuts on solid wood or wood products such as MDF.
|
| COMBINATION SAWS
|
| Combination Saws are designed for good all around use when acceptable rips and crosscuts must be made with one blade. The larger gullets allow deeper cuts and efficient saw dust escape on rip cuts.
|
| PRECISION TRIM SAWS
|
| The Precision Trim saw has teeth which are beveled on the face and the top. This improvement on the standard ATB design gives an extra fine cutting edge. The raker tooth cleans away any stray saw dust which allows the teeth to cut with perfection. This is the smoothest cutting blade you will find.
|
| TRIM SAWS
|
| The trim saw blades are designed with a higher number of teeth to keep a fine cut on the finish side of your material.
|
| PANEL SAWS
|
| Designed for use on panel machines for cutting MDF, PARTICLE BOARD, LAMINATES, and BONDED MATERIALS. Use with scoring saw on reverse side to prevent chipping. All Panel Saws are made with Micro-Sheen C-4 sub-micron carbide for longer life.
|
| SOLID SURFACE SAWS
|
| Designed for cutting CORIAN, AVONITE, FOUNTAINHEAD, SURELL, and similar materials. Our special sub-micron carbide will outlast any conventional carbide, delivering a much better cut over a longer life.
|
| PROFESSIONAL SERIES SAWS
|
| The Professional Series blades are designed with contractors in mind. These lower cost blades are perfect for customers who want a quality blade but are not planning to have it resharpened.
|
|
|
|
Custom Saws can be made to your requirements. Just call for price. Tel: 541-302-1366
|
|
Custom Circular Saw Blades
If our standard blades don't offer what you need, contact us for a special made blade or re-bore of a standard blade. We offer super thin kerf saws for ripping to precision trim saws for micro-jointing. We offer low cost, quick delivery, and high quality carbide tipped saw blades.
|
|
 |
|
Here are some of the top-selling Saws:
|
|
|
|
